Materiel Mobile Reportage

Description

Materiel Mobile Reportage

Prévu pour la diffusion des reportages. Solution permettant de relier le direct au studio.
Distance entre 10 à 20kms, suivant antennes, cablage..

Frequency Ranges 200~960 MHz – 20MHz sub-band

Type of Modulation FM Class F3

VCO Tuning 25 Mhz – Frequency Stability ± 2.5 ppm (Better on request)

Synthesizer Step 25KHz – Image Rejection 60dB Typ.

RN Noise Figure 6dB or lower – Stereo Separation > 45 dB @ 1 KHx

Distorsion 72 dB with 0.2 mV input (Typ 78 dB)

Deenphasis 50 or 75 μS int. Selectable – RF Connectors N-F 50 ohm

B. Band-IF Conn. BNC-F – Base-Band Imp. < 30 ohm – Cooling Forced air

P. Temp. Range 0 ÷ +45°C – Maximum Umidity 90%
AC Supply 100 ÷ 240 Volt; 47 ÷ 63 Hz imension 1 Units Rack 19" 44 cm Depth – Weight 5.8 Kg

Frequency Ranges: 150-470 and 830-960 MHz in 20MHz sub-bands

Modulation: FM Class F3 or lower deviation upon request

Output Impedance & Connector: 50 ohm type ‘N’ female -RF output power: 10W or 20W – RF output power adjusting: 100% or 20% in front panel selectable – Harmonic Frequencies Level (ref. to carrier): < -60 dB -Spurious Frequencies Level (ref. to carrier): < -80 dB

Frequency stability: 2,5 ppm – Input Impedance: 600 ohms or greater -Input Level: – 6 dBm to +10 dBm nominal for nominal deviation adj. -Mono Input (with pre-emphasis): Pre-emphasis 50/75 μs selectable – Audio Bandwidth: Standard 7,5 KHz others upon request -Distortion (THD) in compression: 50 dB – Power requirements: Operating voltage 100 to 240 ± 20% Vac 50/60 Hz

External DC 13.5V 3 – 5 A FM2,7A@15Wout – Power consumption: 50/70 VA –
Battery pack (optional): 13.5 Vdc 9.0 A – Operating temperature 0 to +40°C –
Relative humidity 95% max.Dimensions: Width 20cm Height 9 cm Depht 27 cm Weight: 4.5 kg