Millenium 6 Ch Digital Console
Description
Millenium 6 Ch Digital Console
Millenium Digital Console Features: | |
• Analog or Digital capable on every channel • 32 bit resolution • Sample rate conversion on every input • All outputs available in analog or AES/EBU digital format • 10 extra auxiliary output buses • Up to 10 fully programmable mix-minus outputs • Serial RS-232 interface. • Sleek new front-panel styling |
Measurements are made with 600 ohm loads connected to the analog outputs. 0 dBu equals 0.775 volts RMS independent of load impedance, 0 dBm equals 0.775 volts into a 600 ohm load.Reference Level: +4dBu equals -20 dBFS. FSD equals Full Scale Digital equals +24 dBuAnalog Line Inputs Input Impedance: 40 k ohms, instrumentation amplifier balancedInput Level Range: jumper selectable nominal input level of -16 dBu, -6dBu or +4 dBuInput Level Trim: software trim (digital gain adjust) +/-12.5 dB.Input Headroom: 20 dB above nominal inputAnalog Monitor Inputs Input Impedance: 10 k ohms minimum, differentially balancedInput Level Range: Adjustable +4 dBu nominal, -10 dBu minimumInput Headroom: 20 dB above nominal inputMicrophone Preamplifiers Input Impedance: 10 k ohms Source Impedance: 150 ohms Input Level Range: Equivalent Input Noise: Input Headroom: Analog Outputs Output Load Impedance: Nominal Output Level: Maximum Output Level: Digital Inputs Signal Compliance: Input Sample Rate: Input Level: Input Level Trim: Input Headroom:
|
Dimensions All consoles are 27 inches deep and 9 inches tall 6 channel: 20.75 inches long 12 channel: 32.75 inches long 18 channel: 44.75 inches longDigital Outputs Signal Format: AES-3Signal Compliance: 24 bitOutput Sample Rate: 48 kHz / 44.1 kHz / 32 kHz – Crystal SelectedDigital Reference: Crystal (internal) or external AES-3 input at 48 kHz 100 ppmInternal Sample Rate: 48 kHz / 44.1 kHz / 32 kHz – Crystal SelectedProcessing Resolution: 32 bit floating point DSPConversions: A/D 24-bit, Delta-Sigma, 256x oversampling; D/A 24-bit, Delta-Sigma, 256x oversamplingLatency: <1.0 ms, analog in to analog outFrequency Response Line Input to Program or Utility Output: +0 dB/-0.5 dB, 20 Hz to 20 kHz Microphone Input to Program or Utility Output: Dynamic Range Analog Input to Digital Output: Digital Input to Analog Output: Digital Input to Digital Output: Total Harmonic Distortion + Noise Analog Input to Digital Output: Digital Input to Digital Output: Digital Input to Analog Output: Stereo Separation Warranty Technical assistance is available at all times at no charge by telephone or written correspondence. Items to be returned for repair must include a Return Authorization number obtained from Radio Systems. *Specifications are subject to change without notice |